Turbosmart BLOW OFF & BYPASS VALVE KITS - Dual Port for: Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Pour la voiture Turbosmart BLOW OFF & BYPASS VALVE KITS - Dual Port for: . Turbosmart BLOW OFF & BYPASS VALVE KITS - Dual Port for: Mitsubishi (EVO VII-X), Ralliart Colt User Manual Manuel d'utilisatio

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 4
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 0
1
------------------------------------------------------------------------------------------------------------------------
IMPORTANT NOTES:
Please thoroughly read and understand these instructions before commencing this installation.
The thread on the cap for the vacuum source is AN#3. The standard swivel nipple can be changed to a AN#3 fitting if desired.
RECOMMENDATIONS
Turbosmart recommends that your Blow off valve (BOV) is fitted and adjusted by an appropriately qualified technician
Turbosmart recommends that a boost gauge be permanently fitted to the vehicle
------------------------------------------------------------------------------------------------------------------------
HOW TO INSTALL YOUR BOV
Please check that the following items have been provided in your EVO Dual port kit.
Quantity
Description
Use
1
EVO Dual port BOV
Model Specific blow off valve
1
Port Blanking plug
To blank off a port to convert the BOV to full atmospheric or plumb back
2
6mm Hose clamps
To secure the vacuum lines to the BOV and the engine
1
400mm of 5mm Silicone vacuum line
To connect vacuum source to the BOV
1) Installation on a EVO (Diagrams are from a Mitsubishi Lancer EVO X)
1) Remove the two hose clamps holding the standard BOV to the piping
2) Remove the piping and vacuum line off the standard BOV
Product Name: EVO Dual port
Product Description: Fits Lancer EVO VII – X
(7 - 10)
Product Number: TS-0205-20
Plumb back return
Inlet to BOV
Vue de la page 0
1 2 3 4

Résumé du contenu

Page 1 - HOW TO INSTALL YOUR BOV

1 ------------------------------------------------------------------------------------------------------------------------ IMPORTANT NOTES: • Pleas

Page 2

2 3) Remove the standard vacuum line and replace it with the provided silicone vacuum tube. Secure the end with a hose clamp

Page 3 - TROUBLE SHOOTING

3 IMPORTANT NOTES ON SETTING THE SPRING TENSION - Adjustment to the BOV is made by rotating the cap. To increase spring tension rotate in the dir

Page 4

4 TURBOSMART ONE YEAR LIMITED WARRANTY Turbosmart is a company built on Customer Satisfaction and Service. That is why all of our products go t

Commentaires sur ces manuels

Pas de commentaire