Turbosmart BOV ADAPTERS - Toyota Supra – Twin Turbo Manuel d'utilisateur télécharger pdf

SUPRA JZA80 TWIN TURBO BLOW-OFF VALVE ADAPTOR INSTRUCTIONS

Head Office: Turbosmart Pty Limited, PO Box 264 Croydon, NSW, 2132 Australia Ph: +61(2) 9798 2866 Fax: +61 (2) 9798 2826 Email: info@turbosmart.com.au

USA Office: Turbosmart USA, 1185 Park Center Drive, Suite Q, Vista CA 92081 USA Ph: (760) 727 7610 Fax: (760) 727 7963 Email: sale[email protected]

PART NUMBER

FG-ADM-SUPRA

IMPORTANT NOTES ON FITTING YOUR SUPRA TWIN TURBO ADAPTOR

Turbosmart recommends that your Blow Off Valve (BOV) and Adaptor kit is fitted by an appropriately qualified technician.

ADAPTOR KIT CONTENTS

Please check that the following items have been supplied in your Supra Twin Turbo Adaptor Kit.

Quantity

Description

Use

Supra TT adaptor pipe

Joining pipe from the intercooler to the throttle body

90mm hose clamps

Secures the adaptor pipe to the throttle body

70mm hose clamps

Secures the adaptor pipe to the intercooler pipe

75mm ID Silicon hose coupler

To connect the adaptor pipe to the throttle body

Pre-assembled Silicon hose assembly

Connects the vacuum/boost source to the Turbosmart BOV

5mm spring clamp

Secures the 5mm Silicon hose to the Turbosmart BOV

6mm spring clamp

Secures the 6mm Silicon hose to the factory vacuum/boost source

19mm blanking plug

To block off the factory boost pipe and return pipe

250mm long cable tie

To support the radiator hose by securing it to the BOV

150mm long cable tie

To support the vacuum/boost hose by securing it to radiator hose

Note: The Supra TT pipework adaptor kit readily accepts the following Turbosmart BOVs:

Blow Off Valve Name

Part No.

Blow-off Valve - Vee Port

FG-BOV-002VP

Blow-off Valve - Supersonic

FG-BOV-003SS

Blow-off Valve - Megasonic

FG-BOV-003MS

To install a Dual Port or Plumb Back BOV, fabrication will be required to connect the plumb-back fitting to the intake.

FIT TING YOUR SUPRA T WIN TURBO BOV ADAPTOR

Note: Please thoroughly read and understand both these instructions and the fitting instructions supplied with your

BOV before commencing this installation.

Step 1. Locate the factory BOV and factory intercooler

outlet pipe.

Step 2. The intercooler inlet pipe needs to be removed

to access the factory BOV. Loosen the two hose

clamps securing the intercooler inlet pipe with a Philips

head screwdriver or 10mm socket.

Factory BOV

Factory Intercooler Outlet Pipe

Factory Intercooler Inlet Pipe

1 2 3 4 5 6

PART NUMBER 1
FG-ADM-SUPRA 1