Turbosmart BLOW OFF & BYPASS VALVE KITS - Dual Port for: Manuel d'utilisateur télécharger pdf

------------------------------------------------------------------------------------------------------------------------

IMPORTANT NOTES:

• Please thoroughly read and understand these instructions before commencing this installation.

• The thread on the cap for the vacuum source is AN#3. The standard swivel nipple can be changed to an AN#3 fitting if desired.

• The Nissan GTR series requires 2 Dual Port BOV kits to replace the 2 standard Bypass valves. Each BOV kit is sold

separately.

RECOMMENDATIONS

• Turbosmart recommends that your Blow off valve (BOV) is fitted and adjusted by an appropriately qualified technician

• Turbosmart recommends that a boost gauge be permanently fitted to the vehicle

------------------------------------------------------------------------------------------------------------------------

HOW TO INSTALL YOUR BOV

Please check that the following items have been provided in your Skyline Dual port kit.

Quantity

Description

Use

Skyline Dual port BOV

Model Specific blow off valve

Port Blanking plug

To blank off a port to convert the BOV to full atmospheric or plumb back

6mm Hose clamps

To secure the vacuum lines to the BOV and the engine

400mm of 6mm Silicone vacuum line

To connect vacuum source to the BOV

Installation on a R35 GTR

1) Remove the two standard BOV’s by removing the securing bolts, plumb back hose and vacuum source.

2) Install the Dual Port BOV’s using the standard bolts. Remember to put in the provided gaskets between the flange and the

BOV. Replace the plumb back hose and secure with the standard clamp.

Product Name: Skyline Dual port

Product Description: Fits Skyline GTS-t R33- R34,

Skyline GT-T R34, Skyline GTR R32 – R34, GTR R35

Product Number: TS-0205-1026

Remove standard

BOV’S

Left side BOV

Right side BOV

1 2 3 4

HOW TO INSTALL YOUR BOV 1

Résumé du contenu

Page 1 - HOW TO INSTALL YOUR BOV

1 ------------------------------------------------------------------------------------------------------------------------ IMPORTANT NOTES: • Pleas

Page 2

2 3) Replace the standard vacuum lines with the hose provided in each kit. Use the spring clamps to secure the lines. 4) Start

Page 3

3 2) Install the Dual Port BOV using the standard bolts. Remember to install the supplied gasket in between the mounting flange and the BOV flange.

Page 4

4 TURBOSMART ONE YEAR LIMITED WARRANTY Turbosmart is a company built on Customer Satisfaction and Service. That is why all of our pr

Plus de documents pour Pour la voiture Turbosmart BLOW OFF & BYPASS VALVE KITS - Dual Port for:

Voir le document Turbosmart BLOW OFF & BYPASS VALVE KITS - Dual Port for: Manuel d'utilisateur

Turbosmart BLOW OFF & BYPASS VALVE KITS - Dual Port for: Manuel d'utilisateur (6 pages)

Turbosmart BLOW OFF & BYPASS VALVE KITS - Dual Port for: Manuel d'utilisateur (4 pages)

Commentaires sur ces manuels

Pas de commentaire

Turbosmart BLOW OFF & BYPASS VALVE KITS - Dual Port for: Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Pour la voiture Turbosmart BLOW OFF & BYPASS VALVE KITS - Dual Port for: . Turbosmart BLOW OFF & BYPASS VALVE KITS - Dual Port for: Nissan (Skyline GT-S and GT-R: R32, R33, R34, R35 – excluding R32GTS-t) User Manual Manuel d'utilisatio

Résumé du contenu

Plus de documents pour Pour la voiture Turbosmart BLOW OFF & BYPASS VALVE KITS - Dual Port for:

Commentaires sur ces manuels

Produits connexes et manuels pour Pour la voiture Turbosmart BLOW OFF & BYPASS VALVE KITS - Dual Port for: