Turbosmart BLOW OFF & BYPASS VALVE KITS - Supersonic for: Manuel d'utilisateur télécharger pdf

------------------------------------------------------------------------------------------------------------------------

Suitable for: Mazda MPS (Mazdaspeed) 3, 6 and CX7

IMPORTANT NOTES:

 Please refer to www.turbosmartonline.com for product updates.

 Please thoroughly read and understand these instructions before commencing this installation.

 The thread on the cap for the vacuum source is AN#3. The standard swivel nipple can be changed to a AN#3 fitting if desired.

RECOMMENDATIONS

• Turbosmart recommends that your Blow off valve (BOV) is fitted and adjusted by an appropriately qualified technician

 Turbosmart recommends that a boost gauge be permanently fitted to the vehicle

------------------------------------------------------------------------------------------------------------------------

HOW TO INSTALL YOUR BOV

Please check that the following items have been provided in your Mazda Supersonic kit.

Quantity

Description

Use

Mazda Supersonic BOV

Model Specific blow off valve

Port blanking plug

To blank off a port to convert the BOV to full atmospheric or plumb back

29mm PB Hose blank

To black off OEM plumb back hose

Gasket

To seal the BOV to the intercooler pipe

Installation on a Mazda (Diagrams are from a Mazda 3 MPS)

1) Remove the engine cover by removing the two securing screws/plugs.

2) Locate the intake standard BOV. Remove the vacuum/pressure source.

3) Remove the bolts securing the standard BOV and then remove the plumb back hose by removing the spring clamp.

Product Name: Mazda Supersonic

Product Description: Model-Specific Supersonic BOV

Product Number: TS-0205-1309/TS-0205-1310

1 2 3 4

TROUBLE SHOOTING 3
Happy motoring! 4

Résumé du contenu

Page 1

1 ------------------------------------------------------------------------------------------------------------------------ Suitable for: Mazda MPS (

Page 2

2 4) Push the 29mm blank into the OEM plumb back hose and use the factory spring clamp to secure. Use the factory bolts to fit the new BOV onto t

Page 3 - TROUBLE SHOOTING

3 TROUBLE SHOOTING The following points should be checked if you find that your engine is dipping below normal idle, stalling or if the BOV is func

Page 4 - Happy motoring!

4 ONE YEAR LIMITED WARRANTY Turbosmart is a company built on Customer Satisfaction and Service. That is why all of our products go through reg

Plus de documents pour Pour la voiture Turbosmart BLOW OFF & BYPASS VALVE KITS - Supersonic for:

Voir le document Turbosmart BLOW OFF & BYPASS VALVE KITS - Supersonic for: Manuel d'utilisateur

Turbosmart BLOW OFF & BYPASS VALVE KITS - Supersonic for: Manuel d'utilisateur (3 pages)

Commentaires sur ces manuels

Pas de commentaire

Turbosmart BLOW OFF & BYPASS VALVE KITS - Supersonic for: Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Pour la voiture Turbosmart BLOW OFF & BYPASS VALVE KITS - Supersonic for:. Turbosmart BLOW OFF & BYPASS VALVE KITS - Supersonic for: Mazdaspeed_MPS 3, 6 and CX7 User Manual Manuel d'utilisatio

Résumé du contenu

Plus de documents pour Pour la voiture Turbosmart BLOW OFF & BYPASS VALVE KITS - Supersonic for:

Commentaires sur ces manuels

Produits connexes et manuels pour Pour la voiture Turbosmart BLOW OFF & BYPASS VALVE KITS - Supersonic for: