Turbosmart BLOW OFF VALVES - BMW Dual Port_Plumb Back Kompact Manuel d'utilisateur télécharger pdf

www.TURBOSMARTONLINE.com

------------------------------------------------------------------------------------------------------------------------

IMPORTANT NOTES:

 Please thoroughly read and understand these instructions before commencing this installation.

 The thread on the cap for the vacuum source is AN#3. The standard swivel nipple can be changed to a AN#3 fitting if desired.

RECOMMENDATIONS

• Turbosmart recommends that your Blow off valve (BOV) is fitted and adjusted by an appropriately qualified technician

 Turbosmart recommends that a boost gauge be permanently fitted to the vehicle

Please check that the following items have been provided in your kit

Quantity Description Use

2 Kompact BOV Replaces standard bypass valve

6 Shims (Dual Port only) To increase spring force for high vacuum applications

2 Molded silicone pipes To replace standard return pipes

2 Black Vacuum hose To connect BOV vacuum nipple to factor vacuum tee piece

2 Port Blanking plugs (Dual Port only) To blank off trumpets for recirculation only

4 Spring clamps To secure vacuum hoses

4 Hose clamps To secure Boost and exhaust hoses onto BOV

------------------------------------------------------------------------------------------------------------------------

HOW TO INSTALL YOUR BOV

BLANK PLUG: The Dual port is supplied with a blanking plug for the vent to atmosphere side of the BOV to convert the BOV to full

recirculation mode. Simply unscrew the trumpet and screw in the supplied blanking plug. Alternatively, the blanking plug can be used to

convert the BOV into full vent to atmosphere mode by installing the screw in blank plug onto the plumb back side and by using a 2 x

25mm blanking plug for the plumb back hoses (sold separately – TS-0205-2013).

1) Remove top shroud cover by unscrewing the securing bolts.

2) Remove ECU and brake distribution block cover by unclipping them off the shroud.

Product Name: BMW Kompact BOV Kit

Product Description: Model specific BOV Kit

Product Number: TS-0203-1050/TS-0203-1250

1 2 3 4 5 6

www.TURBOSMARTONLINE.com 1 ------------------------------------------------------------------------------------------------------------------------

Page 2

www.TURBOSMARTONLINE.com 2 3) Pull the wiring harness cover towards the front of the car to slide it off the clips on the shroud 4

Page 3

www.TURBOSMARTONLINE.com 3 7) Unclip the intake snorkel and remove air box by pulling it up off its rubber mounts 8) Locate the

Page 4

www.TURBOSMARTONLINE.com 4 12) Make sure the orientation of the recirculation ports on the BOV’s look like the picture below. 13) In

Page 5

www.TURBOSMARTONLINE.com 5 ADJUSTING YOUR BOV (DUAL PORT ONLY) The aim of the adjustment on the Dual port is to make sure that the piston is hard

www.TURBOSMARTONLINE.com 6 - TURBOSMART ONE YEAR LIMITED WARRANTY Turbosmart is a company built on Customer Satisfaction and Service. That i

Pas de commentaire

Turbosmart BLOW OFF VALVES - BMW Dual Port_Plumb Back Kompact Manuel d'utilisateur