Turbosmart BOV ADAPTERS - Nissan Pulsar_Sunny GTiR Manuel d'utilisateur télécharger pdf (Page 3)

PULSAR GTiR BLOW-OFF VALVE ADAPTOR INSTRUCTIONS

Turbosmart Pty Limited P.O.Box 264 Croydon, NSW, 2132 Australia ABN: 69 081 069 794

Ph: +(612) 9798 2866 Fx: +(612) 9798 2826 Email: instructions@turbosmart.com.au

PART NUMBE

-ADM-GTi

Step 11. Undo and remove the two nuts securing the

factory BOV using a 12mm socket or spanner.

Step 12. Release the factory hose spring clamp with a

set of long nose pliers and remove the return hose from

the factory BOV.

Step 13. Undo the factory hose clamp securing the

turbo hose to the factory BOV using an 8 millimetre

socket. Disconnect the return hose from the factory

BOV.

Step 14. Remove the factory BOV.

Step 15. Insert the 34mm diameter end of the GTiR

Adaptor into the factory turbo hose. Secure it with the

50mm constant tension hose clamp supplied using a 7

mm socket or spanner.

Step 16. If using a Dual Port or Plumb Back, go to

step 17. Otherwise, blank off the return hose with the

29mm Turbosmart plug supplied. Secure the plug with

the factory hose spring clamp.

REMOV

1 2 3 4 5 6

Pas de commentaire

Turbosmart BOV ADAPTERS - Nissan Pulsar_Sunny GTiR Manuel d'utilisateur Page 3