Turbosmart BOV ADAPTERS - Toyota Supra – Twin Turbo Manuel d'utilisateur télécharger pdf (Page 4)

SUPRA JZA80 TWIN TURBO BLOW-OFF VALVE ADAPTOR INSTRUCTIONS

Head Office: Turbosmart Pty Limited, PO Box 264 Croydon, NSW, 2132 Australia Ph: +61(2) 9798 2866 Fax: +61 (2) 9798 2826 Email: info@turbosmart.com.au

USA Office: Turbosmart USA, 1185 Park Center Drive, Suite Q, Vista CA 92081 USA Ph: (760) 727 7610 Fax: (760) 727 7963 Email: sale[email protected]

PART NUMBER

FG-ADM-SUPRA

Step 9. You should have removed the following from

your Supra: (1) top section of intercooler outlet pipe,

(2) bottom section of intercooler outlet pipe and (3)

intercooler outlet pipe bracket.

Step 10. Fit the Silicon hose coupler over the Supra

Adaptor. Install your Turbosmart BOV onto the

adaptor by following the instructions included with the

BOV.

Step 11. Fit the adaptor between the intercooler and

the throttle body. Using the two 90mm hose clamps

supplied, secure the Silicon hose coupler onto the

Soarer adaptor and the throttle body.

Step 12. Use the 70mm hose clamp supplied to secure

the intercooler pipe to the other end of the adaptor pipe.

Tighten the hose clamp with a 7mm socket or

screwdriver.

Step 13. Connect the pre-assembled silicon hose

assembly as shown in the diagram below:

Step 14. Install one end of the Silicon hose assembly

supplied onto the factory BOV boost/vacuum source

and secure with the 6mm spring clamp supplied.

Turbosmart

BOV

Supra Adaptor

Connect one end to

factory BOV

boost/vacuum source

Connect other end to

Turbosmart BOV

700mm

Top Section

Bottom Section

Silicon Hose

Coupler

Intercooler

Outlet Pipe

Bracket

Install 70mm

constant tension

hose clamp here

1 2 3 4 5 6

PART NUMBER 1
FG-ADM-SUPRA 1

Commentaires sur ces manuels

Pas de commentaire

Turbosmart BOV ADAPTERS - Toyota Supra – Twin Turbo Manuel d'utilisateur Page 4

Commentaires sur ces manuels

Produits connexes et manuels pour Pour la voiture Turbosmart BOV ADAPTERS - Toyota Supra – Twin Turbo