Turbosmart BLOW OFF & BYPASS VALVE KITS - Dual Port for: Manuel d'utilisateur télécharger pdf (Page 2)

3) Replace the standard vacuum lines with the hose provided in each kit. Use the spring clamps to secure the lines.

4) Start the car and check for leaks. Proceed in adjusting spring tension

Installation on a Skyline GTS-t and GT-T (Diagrams from a R33 Skyline GTS-t)

1) Locate standard BOV on the inlet manifold. Remove the plumb back hose and vacuum nipple by removing the hose clamps.

Unbolt the BOV flange and remove the standard BOV.

Left side BOV vacuum line

Right side BOV vacuum line

Standard BOV

Plumb back hose

Vacuum hose

1 2 3 4

Pas de commentaire

Turbosmart BLOW OFF & BYPASS VALVE KITS - Dual Port for: Manuel d'utilisateur Page 2